OSHA TOPICS
Mandatory Courses (7 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (7 Hours)
Introduction to OSHA
Introduction to OSHA
Safety Orientation
Walking and Working Surfaces
Walking and Working Surfaces
Fall Protection
Exit Routes, Emergency Action Plans,
Fire Prevention Plans and Fire
Protection
Emergency Planning
Industrial Fire Prevention
Evacuation Procedures
Electrical
Electrical Safety
Personal Protective Equipment
Personal Protective Equipment
Hazard Communication
Hazard Communication Industrial
Facilities
Elective Courses (3 Hours)
Elective Courses (3 Hours)
Hazardous Materials
Hazardous Materials Labels
Dealing with Hazardous Spills
Materials Handling
Materials Handling Safety
Warehouse Safety
Machine Guarding
Machine Guard Safety
Introduction to Industrial Hygiene
No comparable course
Bloodborne Pathogens
Bloodborne Pathogens in
Commercial and Industrial Facilities
Ergonomics
Industrial Ergonomics
Office Ergonomics
Safety and Health Programs
I2P2 (Injury and Illness Prevention
Programs)
Fall Protection
Fall Protection
Optional Courses (1 Hour)
Optional Courses (1 Hour)
Courses on General Industry Hazards
or Policies not covered by mandatory
or elective courses, or additional
courses on mandatory or elective
topics
Any other courses from GTS library
OSHA TOPICS
Mandatory Courses (13 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (13 Hours)
Introduction to OSHA
Introduction to OSHA
Safety Orientation
Managing Safety and Health
Safety Housekeeping and Accident
Prevention
Safety Audits
Hazard Recognition
Accident Investigation
Walking and Working Surfaces
Walking and Working Surfaces
Fall Protection
Exit Routes, Emergency Action Plans,
Fire Prevention Plans and Fire
Protection
Emergency Planning
Industrial Fire Prevention
Evacuation Procedures
Electrical
Electrical Safety
Electrocution Hazards in
Construction Environments Part I...
Types of Hazards and How You Can
Protect Yourself
Personal Protective Equipment
Personal Protective Equipment
Materials Handling
Materials Handling Safety
Warehouse Safety
Hazard Communication
Hazard Communication in Industrial
Facilities
Effective Courses (10 Hour)
Effective Courses (10 Hour)
Hazardous Materials (Flammable and
Combustible Liquids, Spray finishing,
compressed gases, dipping and
coating operations)
Introduction to GHS (The Globally
Harmonized System)
Hazardous Materials Labels
Dealing with Hazardous Spills
Compressed Gas Cylinders
Permit-Required Confined Spaces
Confined Space Entry
Lock-Out/Tag-Out
Lock-Out/Tag-Out
Machine Guarding
Machine Guard Safety
Welding, Cutting, Brazing
Welding Safety
Hot Work Safety and The Permitting
Process
Introduction to Industrial Hygiene
No comparable Courses
Bloodborne Pathogens
Bloodborne Pathogens in
Commercial and Industrial Facilities
Ergonomics
Industrial Ergonomics
Office Ergonomics
Fall Protection
Fall Protection
Safety and Health Programs
I2P2 (Injury and Illness Prevention
Programs)
Powered Industrial Vehicles
Forklift/Powered Industrial Truck
Safety
Forklift Safety: Industrial
Counterbalance Lift Trucks
Optional Courses (7 Hour)
Optional Courses (7 Hour)
Courses on General Industry
Hazards or Policies not covered by
mandatory or elective courses, or
additional courses on mandatory or
elective topics
Any other courses from GTS library
OSHA TOPICS
Mandatory Courses (7 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (7 Hours)
Introduction to OSHA
Introduction to OSHA
Safety Orientation in Construction
Environments
OSHA "Focus Four" Hazards
(4 Hours)
OSHA "Focus Four" Hazards
(4 Hours)
Falls
Fall Protection in Construction
Environments
Electrocution
Electrocution Hazards Part I:
Worksite Safety
Struck-By
Struck-By Hazards in Construction
Environments
Caught-In or Between
Caught-In/Between Hazards in
Construction Environments
Personal Protective and Life Saving
Equipment
Personal Protective Equipment in
Construction Environments
Health Hazards in Construction
Hazard Communication in
Construction Environments
Elective Courses (2 Hours)
Elective Courses (2 Hours)
Cranes, Derricks, Hoists, Elevators
and Conveyors
Crane Safety in Construction
Environments
Rigging Safety in Construction
Environments
Excavations
Trenching and Shoring Safety in
Construction Environments
Materials Handling, Storage, Use
and Disposal
Materials Handling Safety
Dealing with Hazardous Spills
Scaffolds
Suspended Scaffolding Safety in
Construction Environments
Supported Scaffolding Safety in
Construction Environments
Stairways and Ladders
Ladder Safety in Construction
Environments
Tools - Hand and Power
Hand and Power Tool Safety in
Construction Environments
Optional Courses (1 Hour)
Optional Courses (1 Hour)
Courses on General Industry Hazards
or Policies not covered by mandatory
or elective courses, or additional
courses on mandatory or elective
topics
Any other construction or construction-
related courses from GTS library
*Courses are available online in Interactive SCORM and Video-On-Demand (VOD) formats. The interactive
courses typically take an employee 45 minutes to 1 hour to complete. VOD and DVD courses are meant to
be used in classroom training sessions of 45 minutes to 1 hour in length.
OSHA TOPICS
Mandatory Courses (15 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (15 Hours)
Introduction to OSHA
Introduction to OSHA
Safety Orientation in Construction
Environments
Managing Safety and Health
Safety Housekeeping and Accident
Prevention
Safety Audits
Hazard Recognition
Accident Investigation
OSHA "Focus Four" Hazards
(6 Hours)
OSHA "Focus Four" Hazards
(6 Hours)
Falls
Fall Protection
Slips, Trips and Falls
Electrocution
Electrocution Hazards Part II:
Employer Responsibilities
Electrocution Hazards Part I:
Worksite Safety
Struck-By
Struck-By Hazards in Construction
Environments
Caught-In or Between
Caught-In/Between Hazards in
Construction Environments
Personal Protective and Life Saving
Equipment
Personal Protective Equipment in
Construction Environments
Hand, Wrist and Finger Safety in
Construction Environments
Respiratory Protection and Safety
Health Hazards in Construction
Hazard Communication Construction
Environments
Hearing Conservation and Safety
Effective Courses (12 Hour)
Effective Courses (12 Hour)
Cranes, Derricks, Hoists, Elevators
and Conveyors
Crane Safety in Construction
Environments
Rigging Safety in Construction
Environments
Aerial Lifts in Industrial and
Construction Environments
Scissor Lifts in Industrial and
Construction Environments
Confined Space Entry
Confined Space Entry
Ergonomics
Industrial Ergonomics
Excavations
Trenching and Shoring Safety in
Construction Environments
Fire Protection and Prevention
Industrial Fire Prevention
Using Fire Extinguishers
Fire Prevention in the Office
Materials Handling, Storage, Use and
Disposal
Materials Handling Safety
Dealing with Hazardous Spills
Motor Vehicles; Mechanized
Equipment and Marine Operations;
Rollover Protective Structures and
Overhead Protection; Signs, Signals
and Barricades
Driving Safety
Aerial Lifts in Industrial and
Construction Environments
Scissor Lifts in Industrial and
Construction Environments
Hazardous Materials Labels
Powered Industrial Vehicles
Forklift/Powered Industrial Truck
Safety
Forklift Safety: Industrial
Counterbalance Lift Trucks
Safety and Health Programs
I2P2 (Injury and Illness Prevention
Programs)
Scaffolds
Suspended Scaffolding Safety in
Construction Environments
Supported Scaffolding Safety in
Construction Environments
Tools - Hand and Power
Hand and Power Tool Safety in
Construction Environments
Optional Courses (1 Hour)
Optional Courses (1 Hour)*
Courses on General Industry
Hazards or Policies not covered by
mandatory or elective courses, or
additional courses on mandatory or
elective topics
Any other construction or
construction related courses from
GTS library
*Courses are available online in Interactive SCORM and Video-On-Demand (VOD) formats. The interactive
courses typically take an employee 45 minutes to 1 hour to complete. VOD and DVD courses are meant to
be used in classroom training sessions of 45 minutes to 1 hour in length.
Search….
ABOUT US
Global Training Solutions Inc. provides compliance,
workforce training programs and classroom
instruction aimed at the development, training and
safety of employees in many diverse industries
worldwide.
© 2022 Global Training Solutions
HEALTH, SAFETY & ENVIRONMENT
OSHA - EQUIVALENT 10 HOUR
AND 30 HOUR TRAINING
OSHA’s 10 Hour and 30 Hour training curricula have
always been the gold standard for the safety
and regulatory compliance training for employees to
provide them the grounding they require in
the areas that OSHA mandates.
The complete training libraries for both General
Industry and Construction are equivalent to
OSHA’s 10 Hour and 30 Hour General Industry and Construction curricula.
All of the topics in these libraries are available as online (SCORM) courses and Video On
Demand (VOD) programs that can be taken over the internet, as well as DVDs that can be
played locally at any facility worldwide. The interactive courses typically take an employee 45 minutes to 1
hour to complete. VOD and DVD courses have been designed to be used in classroom training sessions of
45 minutes to 1 hour in length.
Employees who complete the curricula will receive a wallet card verifying that they have been
trained on the topics that the OSHA curricula recommends.
A full line of DVD Training Kits, Employee Booklets, and Posters covering more than 100 other
Safety and Regulatory Compliance topics are also available which include Compliance Manuals
with fill-in-the-blank written compliance programs.
OSHA 10 Hour General Industry
OSHA 30 Hour General Industry
OSHA 10 Hour Construction Industry
OSHA 30 Hour Construction Industry
OSHA 10 HOUR AND 30 HOUR
TITLES
Offering some of the largest libraries of DVDs, interactive
CD-ROMs, and web-based / e-Learning Health, Safety and
Environment (HSE) and Regulatory compliance courses in
the industry.
OSHA'S 10-HOUR GENERAL INDUSTRY
FORMATS
Web-based E-learning
DVD
OSHA'S 30-HOUR GENERAL INDUSTRY
OSHA'S 10-HOUR CONSTRUCTION INDUSTRY
OSHA'S 30-HOUR CONSTRUCTION INDUSTRY